Walk-in Drive for Engineering Requirements at Madhapur Office on Sunday 5th June 2011
We are conducting a Recruitment Drive at our Madhapur Office on Sunday i.e. 5th June 2011 for the skills mentioned below.
Walk-in Venue: Infotech Enterprises Ltd. Phase-II, Plot No.11, Software Units Layout, Infocity, Madhapur, Hyderabad -500081, A.P.
Walk-in Time: 9.30 AM to 1.00 PM. Tel: 040-23110357 / 23110357 / 23007462 / 94 / 95 Mobile: 9246372722.
The Job Description for the positions are mentioned below:
PRO-E DESIGN ENGINEERS (JOB CODE: PROE-Oil & Gas)
Experience : 3-8 years
Qualification : B.E /B.Tech
Job Location: Hyderabad
Job Description:
Candidate should have full-fledged knowledge of PRO'E software.
Oil & Gas Offshore equipment Design / Modeling using PRO'E and Auto CAD.
Candidate should be well equipped with Codes & Standards used ASME for pressure vessel calculations.
Knowledge of Hand Calculations in Thermal stress is desired.
Required good drafting knowledge, he should be able to understand complicated designs.
CATIA V5 DESIGN ENGINEERS (JOB CODE : CATIA V5)
Experience : 2-4 years
Qualification : B.E /B.Tech
Job Location: Hyderabad
Job Description:
Candidate should have experience in Automotive / Aerospace Component/structure Design/ using Catia basic.
Good knowledge in drawing reading, GD &T and rework on manufacturing defects (Concessions).
The Manufacturing Methods, Planning, Assembly & Installations knowledge are the added advantage.
UNIGRAPHICS DESIGN ENGINEERS (JOB CODE: UG)
Experience : 2-4 years
Qualification : B.E /B.Tech/M.E/M.TECH/M.S
Job Location: Hyderabad
Job Description:
Candidate should have experience on design of Aircraft/Aero engine / Automobile components using UG NX4/6.
Exposure to manufacturing of components in respective fields will be an added preference.
Position involves design of Compressor, External and Mechanical system components of aero engine.
It involves designing of gear drive system and compressor airfoil and cases.
Candidate conversant with UG modules of Modeling, drafting and assembly with Team Center engineering.
SOLIDWORKS DESIGN ENGINEERS (JOB CODE: SOLIDWORKS)
Experience : 3-5 years
Qualification : B.E /B.Tech /M.E/M.TECH
Job Location: Hyderabad
Job Description:
Oil and gas equipment design using solid works.
Hands on experience in Solid Works.
Good knowledge in creation of Fabrication drawings and welding standards.
Ability to understand 2D-Drawings, P&ID diagrams and pictures/photos of oil gas equipment’s (as built units).
Knowledge of pipe fittings, material selection etc.
Good Communication skills
1 year in the manufacturing /design of oil and gas equipment’s preferred.
Interested candidates can attend drive with latest resume, academic and service credentials & pay slips.
Candidates are unable to attend can forward resumes with Job code in the subject line to: Eng.RecruitmentTeam@infotech-
Candidates who have attended interview with Infotech in the last 6 months are not eligible.
Recruitment Team,
Infotech Enterprises Ltd. Hyderabad.
you may also like: MOST READ
We are conducting a Recruitment Drive at our Madhapur Office on Sunday i.e. 5th June 2011 for the skills mentioned below.
Walk-in Venue: Infotech Enterprises Ltd. Phase-II, Plot No.11, Software Units Layout, Infocity, Madhapur, Hyderabad -500081, A.P.
Walk-in Time: 9.30 AM to 1.00 PM. Tel: 040-23110357 / 23110357 / 23007462 / 94 / 95 Mobile: 9246372722.
The Job Description for the positions are mentioned below:
PRO-E DESIGN ENGINEERS (JOB CODE: PROE-Oil & Gas)
Experience : 3-8 years
Qualification : B.E /B.Tech
Job Location: Hyderabad
Job Description:
Candidate should have full-fledged knowledge of PRO'E software.
Oil & Gas Offshore equipment Design / Modeling using PRO'E and Auto CAD.
Candidate should be well equipped with Codes & Standards used ASME for pressure vessel calculations.
Knowledge of Hand Calculations in Thermal stress is desired.
Required good drafting knowledge, he should be able to understand complicated designs.
CATIA V5 DESIGN ENGINEERS (JOB CODE : CATIA V5)
Experience : 2-4 years
Qualification : B.E /B.Tech
Job Location: Hyderabad
Job Description:
Candidate should have experience in Automotive / Aerospace Component/structure Design/ using Catia basic.
Good knowledge in drawing reading, GD &T and rework on manufacturing defects (Concessions).
The Manufacturing Methods, Planning, Assembly & Installations knowledge are the added advantage.
UNIGRAPHICS DESIGN ENGINEERS (JOB CODE: UG)
Experience : 2-4 years
Qualification : B.E /B.Tech/M.E/M.TECH/M.S
Job Location: Hyderabad
Job Description:
Candidate should have experience on design of Aircraft/Aero engine / Automobile components using UG NX4/6.
Exposure to manufacturing of components in respective fields will be an added preference.
Position involves design of Compressor, External and Mechanical system components of aero engine.
It involves designing of gear drive system and compressor airfoil and cases.
Candidate conversant with UG modules of Modeling, drafting and assembly with Team Center engineering.
SOLIDWORKS DESIGN ENGINEERS (JOB CODE: SOLIDWORKS)
Experience : 3-5 years
Qualification : B.E /B.Tech /M.E/M.TECH
Job Location: Hyderabad
Job Description:
Oil and gas equipment design using solid works.
Hands on experience in Solid Works.
Good knowledge in creation of Fabrication drawings and welding standards.
Ability to understand 2D-Drawings, P&ID diagrams and pictures/photos of oil gas equipment’s (as built units).
Knowledge of pipe fittings, material selection etc.
Good Communication skills
1 year in the manufacturing /design of oil and gas equipment’s preferred.
Interested candidates can attend drive with latest resume, academic and service credentials & pay slips.
Candidates are unable to attend can forward resumes with Job code in the subject line to: Eng.RecruitmentTeam@infotech-
Candidates who have attended interview with Infotech in the last 6 months are not eligible.
Recruitment Team,
Infotech Enterprises Ltd. Hyderabad.
you may also like: MOST READ
No comments:
Post a Comment